- a -

• ALARM_HIGH : alarm.h
• ALARM_LOW : alarm.h
• ALARM_MEDIUM : alarm.h
• ALARM_NONE : alarm.h
• AlarmSnooze : serial_control.h

- b -

• BATTERY_DEEP_DISCHARGE : end_of_line_test.h
• BREATH : main_state_machine.cpp

- c -

• CHECK_ALL_BUTTONS : end_of_line_test.h
• CHECK_BUZZER : end_of_line_test.h
• CHECK_FAN : end_of_line_test.h
• CHECK_UI_SCREEN : end_of_line_test.h
• CONNECT_MAINS : end_of_line_test.h
• CyclesPerMinute : serial_control.h

- d -

• DISCONNECT_MAINS : end_of_line_test.h
• DISPLAY_FLOW : end_of_line_test.h
• DISPLAY_PRESSURE : end_of_line_test.h

- e -

• END_CYCLE : main_state_machine.cpp
• END_SUCCESS : end_of_line_test.h
• EolConfirm : serial_control.h
• EXHALATION : cycle.h
• ExpiratoryTerm : serial_control.h
• ExpiratoryTriggerFlow : serial_control.h

- f -

• FLOW_NOT_STABLE : end_of_line_test.h

- h -

• Heartbeat : serial_control.h
• HighExpiratoryMinuteVolumeAlarmThreshold : serial_control.h
• HighInspiratoryMinuteVolumeAlarmThreshold : serial_control.h
• HighRespiratoryRateAlarmThreshold : serial_control.h
• HighTidalVolumeAlarmThreshold : serial_control.h

- i -

• INHALATION : cycle.h
• INIT_CYCLE : main_state_machine.cpp
• InspiratoryDuration : serial_control.h
• InspiratoryTriggerFlow : serial_control.h

- l -

• LEAK_IS_TOO_HIGH : end_of_line_test.h
• LeakAlarmThreshold : serial_control.h
• Locale : serial_control.h
• LowExpiratoryMinuteVolumeAlarmThreshold : serial_control.h
• LowInspiratoryMinuteVolumeAlarmThreshold : serial_control.h
• LowRespiratoryRateAlarmThreshold : serial_control.h
• LowTidalVolumeAlarmThreshold : serial_control.h

- m -

• MAX_PRESSURE_NOT_REACHED : end_of_line_test.h
• MAX_PRESSURE_REACHED_OK : end_of_line_test.h
• MIN_PRESSURE_NOT_REACHED : end_of_line_test.h

- o -

• O2_PRESSURE_NOT_REACH : end_of_line_test.h

- p -

• PatientGender : serial_control.h
• PatientHeight : serial_control.h
• PC_AC : cycle.h
• PC_CMV : cycle.h
• PC_VSAI : cycle.h
• PeakPressureAlarmThreshold : serial_control.h
• PEEP : serial_control.h
• PlateauDuration : serial_control.h
• PlateauPressure : serial_control.h
• PLUG_AIR_TEST_SYTEM : end_of_line_test.h
• PRESSURE_NOT_STABLE : end_of_line_test.h

- r -

• REACH_MAX_PRESSURE : end_of_line_test.h
• REACH_NULL_PRESSURE : end_of_line_test.h
• RespirationEnabled : serial_control.h

- s -

• SETUP : main_state_machine.cpp
• START : end_of_line_test.h
• START_LEAK_MESURE : end_of_line_test.h
• START_LONG_RUN_BLOWER : end_of_line_test.h
• START_O2_TEST : end_of_line_test.h
• STATE_ERROR : end_of_line_test.h
• STATE_IN_PROGRESS : end_of_line_test.h
• STATE_SUCCESS : end_of_line_test.h
• STOPPED : main_state_machine.cpp
• SUPPLY_TO_EXPANDER_NOT_CONNECTED : end_of_line_test.h

- t -

• TargetInspiratoryFlow : serial_control.h
• TargetTidalVolume : serial_control.h
• TEST_BAT_DEAD : end_of_line_test.h
• TiMax : serial_control.h
• TiMin : serial_control.h
• TRIGGER_RAISED : main_state_machine.cpp
• TriggerEnabled : serial_control.h
• TriggerOffset : serial_control.h

- u -

• USER_CONFIRMATION_BEFORE_O2_TEST : end_of_line_test.h

- v -

• VC_AC : cycle.h
• VC_CMV : cycle.h
• VentilationMode : serial_control.h

- w -

• WAIT_USER_BEFORE_LONG_RUN : end_of_line_test.h